These Indian Sandstone floor tiles were installed around an indoor swimming pool at a magnificent residence in Oxford. As you can see from the photograph below the Sandstone was not looking its best and given its proximity to the pool care needed to be taken not to contaminate the pool with dirty water from the cleaning process or chemicals
Swimming Pool Tile Cleaning
We made a decision early on that we would not use any chemicals to clean or seal the tiles to ensure the water in the pool remained un-contaminated, we also setup a temporary barrier to stop any debris going in the pool and used a high pressure machine fitted with a flat surface head to prevent water flying everywhere.
The process worked well and you can see the difference in the photographs above however the job did take taking longer than usual to complete but the main thing was the customer was happy with the result.
Source: Swimming Pool Tile Cleaning service in the Oxfordshire
Photographs below of a job we did cleaning and sealing the Quarry Tiles surrounding a residential indoor swimming pool floor tiles at a grand residence in Cambridge. As you can see from the photograph below the Quarry tiles and Grout was looking rather washed out and given their proximity to the pool extra care was needed to be ensure we didn’t contaminate the pool with dirty water from the cleaning process or chemicals, fortunately all our equipment is electrically isolated so that was not a problem.
Swimming Pool Tile Cleaning
Fortunately the pool was fitted with a cover so we made a start cleaning the tiles using a strong dilution of Tile Doctor Pro-Clean mixed 50/50 with NanoTech Ultra Clean which add tiny abrasive particles into the cleaning solution making it more effective. Working in sections the solution was left to soak into the tile and grout before being worked into the floor using a rotary machine fitted with a scrubbing pad running at slow speed to reduce splashing. This process removed any remaining sealer and cleaned the tile and grout up nicely, we used clean water to rinse the floor and a wet vacuum to remove the soiled solution making sure not to drain any solutions into the pool and re-treating any stubborn areas. This process was fairly tedious and took up much of the day but the results were well worth the effort.
Sealing Quarry Tiles around a Pool
The tiles were left to dry off overnight and we came back the next day to seal the floor using two coats of Tile Doctor Colour Grow which is an impregnating sealer that fills up the pores in a tile to protect it from stains whilst enhancing its natural colours.
The process worked well and you can see the difference in the photographs above however the tricky nature of the environment meant it took longer than usual to complete but the main thing was the customer was happy with the result.
Source: Swimming Pool Mosaic Tile Cleaning service in the Cambridge